img

4 4
3 3
2 2
1 1
Your present:
Homepage
>>
>>
>>
Analysis of the development trend of China's stone industry in 2017

Analysis of the development trend of China's stone industry in 2017

  • Categories:Industry News
  • Views:
  • Author:
  • Origin:
  • Time of issue:2017-03-15 10:11

(Summary description)As a high-end building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facility construction. At present, the common stone materials on the market are mainly divided into natural stone, artificial stone and marble. Natural stone is divided into slate and granite according to the physical and chemical characteristics and quality. Artificial stone is divided into terrazzo and synthetic stone according to the process. Terrazzo is made by forging and pressing raw materials such as cement and concrete; synthetic stone is made by pressing and polishing natural stone with crushed stone as raw material, plus adhesives. The latter two are artificially made, so the strength is not as high as the value of natural stone. Stone is a high-end product of building decoration materials, and natural stone is roughly divided into

Analysis of the development trend of China's stone industry in 2017

(Summary description)As a high-end building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facility construction. At present, the common stone materials on the market are mainly divided into natural stone, artificial stone and marble. Natural stone is divided into slate and granite according to the physical and chemical characteristics and quality. Artificial stone is divided into terrazzo and synthetic stone according to the process. Terrazzo is made by forging and pressing raw materials such as cement and concrete; synthetic stone is made by pressing and polishing natural stone with crushed stone as raw material, plus adhesives. The latter two are artificially made, so the strength is not as high as the value of natural stone. Stone is a high-end product of building decoration materials, and natural stone is roughly divided into

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2017-03-15 10:11
  • Views:
Information

As a high-end building decoration material, stone is widely used in indoor and outdoor decoration design, curtain wall decoration and public facility construction. At present, the common stone materials on the market are mainly divided into natural stone, artificial stone and marble. Natural stone is divided into slate and granite according to the physical and chemical characteristics and quality. Artificial stone is divided into terrazzo and synthetic stone according to the process. Terrazzo is forged and pressed with raw materials such as cement and concrete; synthetic stone is made with crushed natural stone as raw material, plus adhesives, etc., which are pressurized and polished. The latter two are artificially made, so the strength is not as high as the value of natural stone. Stone is a high-end product of building decoration materials. Natural stone is roughly divided into granite, slate, sandstone, limestone, volcanic rock, etc. With the continuous development and progress of science and technology, artificial stone products are constantly changing, and the quality and beauty are no less than natural. Stone. With the development of architectural design, stone has long become one of the important raw materials for construction, decoration, roads, and bridge construction.

my country has a large reserve of stone resources, but the consumption of stone raw materials is also very large. Stone is a category of non-renewable resources. Unlimited excavation and waste is a greedy claim from nature. Can stone be recycled? Nowadays? Promote environmental protection, some stones can be used elsewhere to avoid waste of resources.

From an economic and technical point of view, compared with other building materials, not only the quality of stone itself is better, but also because of its hard stone, it is difficult to mine and the cost is relatively high. In addition, the requirements for finishing and surface treatment are high. Volume cut area is large, the cost of sawing and cutting is relatively high, and the processing cost per unit area is also relatively high, so its price is high, and some precious decorative stones are worth thousands of yuan per square meter.

In addition, the decorative stone, especially natural granite, has a dense structure, hard properties, acid resistance, corrosion resistance, abrasion resistance, low water absorption (less than 1%), high compressive strength (120-250MPa), and freeze resistance. Strong performance, not easy to weather, good durability, long service life (100-200 years for coarse-grained granite, 500-1000 years for fine-grained granite), and it is difficult to achieve this after one use or even multiple cycles. Ultimate service life.

At present, although plastics, ceramics and other building materials have been widely used and have seized part of the market of building materials and decoration firms, stone is still the first choice for building decoration projects due to its unique natural advantages. Especially with the vigorous development of the construction and decoration industries in China, stone has undoubtedly become the choice for outdoor landscape design and interior decoration. While people's demand for various stone varieties and specifications is increasing, the stone industry should implement scientific management, give play to the advantages of its own industrial clusters, and improve the positioning of the industry and the market. The development of the domestic stone industry has a long way to go, and its core is closely related to its processing technology and manufacturing machinery.

Nowadays, the uneven scale of domestic stone enterprises has caused disorderly competition among the domestic stone machinery industry and eventually led to a vicious circle. So, what kind of strategies are needed to improve this phenomenon? In addition to clarifying their own responsibilities and pressures, stone machinery enterprises must also take "environmental protection", "high quality", "efficient" and "energy saving" as their ultimate development. The goal is to increase the yield of products through scientific innovation and the introduction of new technologies, and ultimately achieve an overall improvement in the level of the entire industry.

It can be seen that the reuse of stone is not only environmentally friendly, but also reduces costs. It is consistent with the development core of energy conservation and environmental protection that we are now advocating. The road to energy conservation and environmental protection is still long. The ecological balance of the earth in the future still needs us to work together to maintain. The stone industry is on the road of recycling is a necessary means of development (the above are purely personal opinions)

Scan the QR code to read on your phone